PU-COAT TOP T aliphatic transparent protective layer

PU-COAT TOP T

Aliphatic polyurethane waterproofing transparent protective layer

PU-COAT TOP T is a single-component, transparent, solvent-based liquid coating based on aliphatic polyurethane resins. This coating has exceptional resistance to UV rays and extreme abrasion, providing surfaces with long-lasting protection and an aesthetic appearance.

Why choose PU-COAT TOP T?

• UV resistance and color stability: Unlike standard polyurethanes, this aliphatic coating does not chalk, does not yellow, and retains its color even when exposed to direct sunlight.

• Mechanical resistance: Excellently withstands pedestrian and vehicle traffic, is highly resistant to abrasion and mechanical loads.

• Elasticity: Maintains elasticity and working deformations over a wide temperature range (from -40 °C to +80 °C ).

• Durability: Successfully passed 2000 hours of accelerated aging tests (UV and humidity cycles) without any changes in mechanical properties.

• High hydrophobicity: Provides excellent resistance to water and moisture.

• Aesthetics: Gives the surface a glossy and color-stable finish. Transparent product.

AREAS OF USE

Used as a protective top layer on PU-COAT membrane:

• Terraces and verandas.

• Pedestrian paths and sidewalks.

• Open parking lots.

• Stadiums and other public spaces where wear resistance is required.

TECHNICAL CHARACTERISTICS

• Consumption: When used as a top coat – 150 – 250 g/m² (depending on surface roughness).

• Skin formation: Surface skin formation within 2 hours (at 23 °C).

• Hardening time: 12 – 24 hours.

• Elasticity: Elongation at break – 150% .

• Tensile strength: 4.64 N/mm².

• Hardness: 30 (Shore D).

• Specific gravity: 1.10 g/cm³.

INSTRUCTIONS FOR USE

The surface to be coated must be dry, clean, free of dust, oil or other loose particles. It is recommended to avoid coating in rainy weather.

Application: Apply in 1-2 coats using a roller, brush or airless sprayer.

• Interval between coats: From 3-4 to 48 hours (the exact time depends on the ambient temperature and humidity).

Colors and packaging:

• Colors: Standard white and gray. Other colors are available upon special order.

• Packages: 1 kg, 5 kg and 20 kg capacity.

SAFETY INFORMATION:

Classification of the substance or mixture: 

This product has been classified in accordance with the CLP Regulation (EC) No 1272/2008.

Label elements:

Danger

CLP Regulation (EC) No 1272/2008:

Hazard statements:

• H226: Flammable liquid and vapour.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
• H335: May cause respiratory irritation.
• H360: May damage fertility or the unborn child.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H412: Harmful to aquatic life with long lasting effects.

Precautionary statements:

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P280: Wear protective gloves / protective clothing / eye (face) protection / respiratory protection / protective footwear.
• P304+P340: IF INHALED: remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P313: IF exposed or concerned: Get medical advice.
• P342+P311: If experiencing respiratory symptoms: Call a POISON CENTER or doctor.
• P370+P378: In case of fire: use foam (AB), dry chemical powder (ABC) or carbon dioxide (BC) to extinguish.
• P501: Dispose of contents / container in accordance with the regulations on hazardous waste or packaging and packaging waste.

Additional information:

• EUH204: Contains isocyanates. May produce an allergic reaction.
• Contains: dibutyltin dilaurate, hydroxyphenylbenzotriazole derivative, bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate, methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate. May produce an allergic reaction.

Substances contributing to the classification
Aliphatic polyurethane polymer; Reaction mass of ethylbenzene and xylene; 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate; Dibutyltin dilaurate.

Supplemental labelling:

• For professional users only.
• As from 24 August 2023, adequate training is required before industrial or professional use.

• UFI: E3CM-WP72-N305-A3HD

Other hazards:

The product does not meet the PBT / vPvB criteria.
Endocrine disrupting properties: The product does not meet these criteria.